Monitoring lets you listen to the track you are recording in real time. Most commonly used for hearing your voice, you’ll find it useful to enable monitoring for any track where you’re recording with a connected device, such as a microphone or a guitar.
- Connect your headphones/earphones to your device
- If you're recording a Voice/Audio track, open the
AutoPitch panel. If you're recording a Guitar/Bass track, open the
Source panel
Click on
Monitoring to enable/disable it
- Connect your headphones/earphones to your device
- Open your track and tap the
Tap
Note
Make sure you're using headphones/earphones when using Monitoring to prevent audio from bleeding into your microphone during recording.
Comments
Article is closed for comments.